[mvapich-discuss] Failure when building for PSM

[Jonathan Perkins]

For more information on how to build for PSM please take a look at our
userguide.

http://mvapich.cse.ohio-state.edu/support/user_guide_mvapich2-2.0rc1.html#x1-160004.8
On Apr 25, 2014 9:23 AM, "Jonathan Perkins" <perkinjo at cse.ohio-state.edu>
wrote:

> Hello Phillip, it appears that you have many CFLAGS in your
> environment when building mvapich2 that should not be there and can
> cause complications during the build.  The specific CFLAG that causes
> this error is -DMPID_USE_SEQUENCE_NUMBERS.  However you should remove
> all of them and rely only on configure options.
>
> FYI, we see the following CFLAGS in the config.log that should not be
> present...
> -DUSE_HEADER_CACHING -DONE_SIDED -DMPID_USE_SEQUENCE_NUMBERS
> -D_SHMEM_COLL_ -DRDMA_CM -DDISABLE_PTMALLOC
>
> It also looks like you set LIBS or LDFLAGS as well.  I also suggest
> that these flags are unset.
>
> Finally, I recommend removing the --with-pm=mpd option provided to
> configure.  Please let us know if this helps or if you have any
> further questions.
>
> On Thu, Apr 24, 2014 at 5:09 PM, Philipp Thomas <pth at suse.de> wrote:
> > I'm the person responsible for packaging mvapich2 and other OFED related
> > packages for openSUSE/SLES. When trying to build mvapich2 2.0rc1 FOR psm,
> > i.e. passing '--with-device=ch3:psm' to configure, building stops with
> > errors:
> >
> > src/mpid/ch3/src/ch3u_rndv.c: In function 'MPIDI_CH3_RndvSend':
> > src/mpid/ch3/src/ch3u_rndv.c:67:8: error: 'seqnum' undeclared (first use
> in this function)
> >      MPIDI_VC_FAI_send_seqnum(vc, seqnum);
> >                 ^
> > src/mpid/ch3/src/ch3u_rndv.c:67:8: note: each undeclared identifier is
> reported only once for each function it appears in
> > src/mpid/ch3/src/ch3u_rndv.c:68:16: error:
> 'MPIDI_CH3_Pkt_rndv_req_to_send_t' has no member named 'seqnum'
> >      MPIDI_Pkt_set_seqnum(rts_pkt, seqnum);
> >                 ^
> > src/mpid/ch3/src/ch3u_rndv.c: In function
> 'MPIDI_CH3_PktHandler_RndvReqToSend':
> > src/mpid/ch3/src/ch3u_rndv.c:209:468: error:
> 'MPIDI_CH3_Pkt_rndv_req_to_send_t' has no member named 'seqnum'
> >      set_request_info(rreq, rts_pkt, MPIDI_REQUEST_RNDV_MSG);
> >
> > Attached is the config.log from this build. What other info do
> > you need to fix this?
> >
> > Philipp
> > ``
> > _______________________________________________
> > mvapich-discuss mailing list
> > mvapich-discuss at cse.ohio-state.edu
> > http://mailman.cse.ohio-state.edu/mailman/listinfo/mvapich-discuss
> >
>
>
>
> --
> Jonathan Perkins
> http://www.cse.ohio-state.edu/~perkinjo
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.cse.ohio-state.edu/pipermail/mvapich-discuss/attachments/20140425/b8b20486/attachment.html>