[Intl_DxMedPhys] EXT MSG Re: Raysafe calibrations are going to Sweden

Nima Kasraie Nima.Kasraie at UTSouthwestern.edu
Fri Oct 17 14:08:18 EDT 2025


Whatever happened to that Wisconsin lab that did calibrations? I used to use them ~10yrs ago for my Radcal.


Nima Kasraie, PhD
Diagnostic Imaging Medical Physicist
Associate Professor of Radiology
UT Southwestern - Children’s Medical Center Dallas
________________________________
From: Intl_dxmedphys_wd_osu_list <intl_dxmedphys_wd_osu_list-bounces at lists.osu.edu> on behalf of Trey J Slauter via Intl_dxmedphys_wd_osu_list <intl_dxmedphys_wd_osu_list at lists.osu.edu>
Sent: Friday, October 17, 2025 1:01:32 PM
To: Johnson, Loretta M <lorettajohnson at uabmc.edu>; Peter Watson, Mr <peter.watson at mcgill.ca>; Carl Keener <keener at marpinc.com>; Christopher Passmore <passmore.christopher at gmail.com>
Cc: intl_dxmedphys_wd_osu_list at lists.osu.edu <intl_dxmedphys_wd_osu_list at lists.osu.edu>
Subject: Re: [Intl_DxMedPhys] EXT MSG Re: Raysafe calibrations are going to Sweden

I saw and spoke to Raysafe representative at AAPM this year. Don’t recall if it was technically a Fluke booth or not though… Trey J. Slauter, MS, DABR, CIIP Lecturer II Diagnostic Medical Physicist Department of Radiology Phone: 505-272-3778

I saw and spoke to Raysafe representative at AAPM this year. Don’t recall if it was technically a Fluke booth or not though… Trey J. Slauter, MS, DABR, CIIP Lecturer II Diagnostic Medical Physicist Department of Radiology Phone: 505-272-3778

I saw and spoke to Raysafe representative at AAPM this year.  Don’t recall if it was technically a Fluke booth or not though…





Trey J. Slauter, MS, DABR, CIIP

Lecturer II

Diagnostic Medical Physicist

Department of Radiology

[signature_655412057]

Phone: 505-272-3778

Cell: 559-967-0488





From: Intl_dxmedphys_wd_osu_list <intl_dxmedphys_wd_osu_list-bounces+tslauter=salud.unm.edu at lists.osu.edu> on behalf of Johnson, Loretta M via Intl_dxmedphys_wd_osu_list <intl_dxmedphys_wd_osu_list at lists.osu.edu>
Date: Friday, October 17, 2025 at 11:59 AM
To: Peter Watson, Mr <peter.watson at mcgill.ca>, Carl Keener <keener at marpinc.com>, Christopher Passmore <passmore.christopher at gmail.com>
Cc: intl_dxmedphys_wd_osu_list at lists.osu.edu <intl_dxmedphys_wd_osu_list at lists.osu.edu>
Subject: Re: [Intl_DxMedPhys] EXT MSG Re: Raysafe calibrations are going to Sweden

Isn’t RaySafe now owned by Fluke? Might the RaySafe equipment have been in the Fluke booth? Peace, Loretta Loretta Johnson, Ph. D. , DABR, FAAPM | Associate Professor Director | Division of Physics and Engineering Department of Radiology | Heersink

[[-- External - this message has been sent from outside the University --]]



Isn’t RaySafe now owned by Fluke?  Might the RaySafe equipment have been in the Fluke booth?



Peace,

Loretta



Loretta Johnson, Ph.D., DABR, FAAPM | Associate Professor

Director | Division of Physics and Engineering

Department of Radiology | Heersink School of Medicine

UAB | The University of Alabama at Birmingham

GSB Suite #301 | 619 19th Street South | Birmingham, AL 35249

P: 205.934.7592 | lorettajohnson at uabmc.edu<mailto:lorettajohnson at uabmc.edu>



https://urldefense.com/v3/__https://www.uab.edu/medicine/radiology/__;!!KGKeukY!wNjihubWdnn1fElH5jpvBE3I8K_HjXTWlKenmJQm-zn3oGrvHIANNuQMVuM9Opr8YRix86Fi73FR1aSAWHRPZJNte5XiJdQdaWebcjrw_Pac_nGprspFYw$ <https://urldefense.com/v3/__https:/www.uab.edu/medicine/radiology/__;!!KGKeukY!y462vvTpGAzy9S0VF18k8QLYIXBS-mphbd4anDw0yo-8mC8WSn2AabfAjeY2D8oHeAqxrXz1FV8na8UR83aFMxB7iSLid0ZxfJJIHbTsWqNnIfIqrw$>



From: Intl_dxmedphys_wd_osu_list <intl_dxmedphys_wd_osu_list-bounces at lists.osu.edu> on behalf of Dxmedphys new list <intl_dxmedphys_wd_osu_list at lists.osu.edu>
Reply-To: "Peter Watson, Mr" <peter.watson at mcgill.ca>
Date: Friday, October 17, 2025 at 11:59 AM
To: Carl Keener <keener at marpinc.com>, Christopher Passmore <passmore.christopher at gmail.com>
Cc: Dxmedphys new list <intl_dxmedphys_wd_osu_list at lists.osu.edu>
Subject: EXT MSG Re: [Intl_DxMedPhys] Raysafe calibrations are going to Sweden



This might be correlated, but at the past couple of conferences I've gone to (RSNA, AAPM, ECR), there has not been a booth for RaySafe in the vendor area. I feel like that's a bad sign? Peter Watson, PhD, MCCPM (masculine pronouns) Medical Physicist,

This might be correlated, but at the past couple of conferences I've gone to (RSNA, AAPM, ECR), there has not been a booth for RaySafe in the vendor area. I feel like that's a bad sign?



Peter Watson, PhD, MCCPM

(masculine pronouns)

Medical Physicist, McGill University Health Centre

Assistant Professor, Medical Physics Unit and Department of Oncology, McGill University

________________________________

From: Intl_dxmedphys_wd_osu_list <intl_dxmedphys_wd_osu_list-bounces+peter.watson=mcgill.ca at lists.osu.edu> on behalf of Christopher Passmore via Intl_dxmedphys_wd_osu_list <intl_dxmedphys_wd_osu_list at lists.osu.edu>
Sent: October 17, 2025 8:16 AM
To: Carl Keener <keener at marpinc.com>
Cc: intl_dxmedphys_wd_osu_list at lists.osu.edu <intl_dxmedphys_wd_osu_list at lists.osu.edu>
Subject: Re: [Intl_DxMedPhys] Raysafe calibrations are going to Sweden



FHS / Fortive shutdown the RaySafe repair and calibration services in the United States. This was part of a restructuring that occurred about a month ago. Best Regards, Passmore. Christopher@ gmail. com +1-708-224-1876 Mobile 3505 Good Night Trail

FHS / Fortive shutdown the RaySafe repair and calibration services in the United States. This was part of a restructuring that occurred about a month ago.



Best Regards,



Passmore.Christopher at gmail.com

+1-708-224-1876<tel:+1-708-224-1876> Mobile

3505 Good Night Trail

Leander, Texas 78641



On Oct 16, 2025, at 9:47 PM, Carl Keener via Intl_dxmedphys_wd_osu_list <intl_dxmedphys_wd_osu_list at lists.osu.edu> wrote:

Does anyone know why Raysafe is sending their X2 calibrations to Sweden? As with previous bouts of calibration delays, Raysafe is disclosing very little information about the reasons for the change, and they are giving very vague estimates of

Does anyone know why Raysafe is sending their X2 calibrations to Sweden?



As with previous bouts of calibration delays, Raysafe is disclosing very little information about the reasons for the change, and they are giving very vague estimates of the turnaround time. One of our systems has passed the one-month mark, and it is in the service program which promises a faster turnaround times.



Carl Keener



Carl R. Keener, BFA, Ph.D., DABMP, DABR

Texas Medical Physicist License FMP00000431

Medical & Radiation Physics, Inc.

210 227-1460







________________________________

UT Southwestern

Medical Center

The future of medicine, today.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.osu.edu/mailman/private/intl_dxmedphys_wd_osu_list/attachments/20251017/07f8dd20/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001[38].jpg
Type: image/jpeg
Size: 2087 bytes
Desc: image001[38].jpg
URL: <https://lists.osu.edu/mailman/private/intl_dxmedphys_wd_osu_list/attachments/20251017/07f8dd20/attachment.jpg>


More information about the Intl_dxmedphys_wd_osu_list mailing list