[Intl_DxMedPhys] Siemens Pro.Pulse questions

[Douglas Pfeiffer]

Good morning, all!

I have a question for anyone out there has experience with the Siemens Pro.Pulse in service mode. I am trying to make static exposure measurements for kV and HVL. I align my sensor at isocenter and I get no reading at all. If I offset inferiorly by about 1 cm, I get a trigger, but the measurements don’t make sense. The image put up by the scanner is white circle, oddly enough. I’d be most grateful if someone can help me figure out what’s going on and how to fix it!

Best regards,
Doug



Douglas Pfeiffer, MS, DABR FACR, FAAPM
Medical Physicist, Radiation Safety Officer
Boulder Community Health
xraydoug at me.com
303.415.7515

+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-

The opinions expressed in this message are the product of the gray and white matter loitering in my cranium. I speak for myself and no one else, unless I say otherwise.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osu.edu/pipermail/intl_dxmedphys_wd_osu_list/attachments/20250806/43f700d3/attachment.html>