[mvapich-discuss] MVAPICH2 1.7 + LiMIC2 0.5.5

[Tibor Pausz]

Hello Jonathan

Thanks for the help. The problem is now solved. I have seen, that the
MVAPICH2 1.7 documentation includes these essential information. It
would be nice, if the README file in the LiMIC distribution could be
changed so that this information would be included.

Best regards

Am 24.02.2012 17:02, schrieb Jonathan Perkins:
> On Fri, Feb 24, 2012 at 04:52:50PM +0100, Tibor Pausz wrote:
>> Hello Jonathan
>>
>> I have run the commands as you suggested. Here are the results
>>
>> Am 24.02.2012 15:02, schrieb Jonathan Perkins:
>>> Can you provide the output of the following commands on one
>>> of the allocated nodes?
>>>
>>> mpiname -a
>> MVAPICH2 1.7 Thu Oct 13 17:31:44 EDT 2011 ch3:mrail
>>
>> Compilation
>> CC: icc -I/cm/shared/apps/slurm/2.3.3/include   -DNDEBUG -DNVALGRIND -O2
>> CXX: icpc   -DNDEBUG -DNVALGRIND -O2
>> F77: ifort   -O2
>> FC: ifort   -O2
>>
>> Configuration
>> --prefix=/home/dftfunc/pausz/soft/mvapich2-1.7-limic
>> --with-device=ch3:mrail --with-rdma=gen2 --enable-shared --enable-xrc
>> --with-pm=no --with-pmi=slurm --with-limic2=/home/dftfunc/pausz/soft/limic2
> Thanks for the output.  It looks limic2 wasn't installed in the system
> path.  Perhaps this is why the udev rules didn't take effect.
>
> You should see a file named 10-limic.rules in your
> /home/dftfunc/pausz/soft/limic2/etc/udev/rules.d directory (hopefully
> that's the right path).
>
> Install this to /etc/udev/rules.d/ on your machines if you'd like the
> correct permissions to be set for /dev/limic automatically when the
> limic module is loaded.
>