[mvapich-discuss] MVAPICH2 1.7 + LiMIC2 0.5.5
Jonathan Perkins
perkinjo at cse.ohio-state.edu
Fri Feb 24 11:02:54 EST 2012
On Fri, Feb 24, 2012 at 04:52:50PM +0100, Tibor Pausz wrote:
> Hello Jonathan
>
> I have run the commands as you suggested. Here are the results
>
> Am 24.02.2012 15:02, schrieb Jonathan Perkins:
> > Can you provide the output of the following commands on one
> > of the allocated nodes?
> >
> > mpiname -a
>
> MVAPICH2 1.7 Thu Oct 13 17:31:44 EDT 2011 ch3:mrail
>
> Compilation
> CC: icc -I/cm/shared/apps/slurm/2.3.3/include -DNDEBUG -DNVALGRIND -O2
> CXX: icpc -DNDEBUG -DNVALGRIND -O2
> F77: ifort -O2
> FC: ifort -O2
>
> Configuration
> --prefix=/home/dftfunc/pausz/soft/mvapich2-1.7-limic
> --with-device=ch3:mrail --with-rdma=gen2 --enable-shared --enable-xrc
> --with-pm=no --with-pmi=slurm --with-limic2=/home/dftfunc/pausz/soft/limic2
Thanks for the output. It looks limic2 wasn't installed in the system
path. Perhaps this is why the udev rules didn't take effect.
You should see a file named 10-limic.rules in your
/home/dftfunc/pausz/soft/limic2/etc/udev/rules.d directory (hopefully
that's the right path).
Install this to /etc/udev/rules.d/ on your machines if you'd like the
correct permissions to be set for /dev/limic automatically when the
limic module is loaded.
--
Jonathan Perkins
http://www.cse.ohio-state.edu/~perkinjo
More information about the mvapich-discuss
mailing list