[mvapich-discuss] Fwd: Help using MVAPICH2 v1.4-gcc on x86_64 on
RedHat 5.4
Keyur Patel
keyur.keyman at gmail.com
Thu Oct 21 08:37:57 EDT 2010
Skipped content of type multipart/alternative-------------- next part --------------
Bootdata ok (command line is ro root=/dev/rhel5/root rhgb quiet)
Linux version 2.6.18-164.el5xen (mockbuild at x86-003.build.bos.redhat.com) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Tue Aug 18 15:59:52 EDT 2009
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 00000001dc53b000 (usable)
On node 0 totalpages: 1951035
DMA zone: 1951035 pages, LIFO batch:31
DMI 2.6 present.
ACPI: RSDP (v002 DELL ) @ 0x00000000000fe300
ACPI: XSDT (v001 DELL E2 0x06222004 MSFT 0x00010013) @ 0x00000000cf67de18
ACPI: FADT (v004 DELL E2 0x06222004 MSFT 0x00010013) @ 0x00000000cf75fc18
ACPI: MADT (v002 DELL E2 0x06222004 MSFT 0x00010013) @ 0x00000000cf67cf18
ACPI: TCPA (v002 0x00000000 0x00000000) @ 0x00000000cf76dd18
ACPI: MCFG (v001 A M I GMCH945. 0x06222004 MSFT 0x00000097) @ 0x00000000cf76dc98
ACPI: HPET (v001 DELL E2 0x00000001 ASL 0x00000061) @ 0x00000000cf76dc18
ACPI: BOOT (v001 DELL E2 0x06222004 AMI 0x00010013) @ 0x00000000cf76db98
ACPI: SLIC (v003 DELL E2 0x06222004 MSFT 0x00010013) @ 0x00000000cf766818
ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20080729) @ 0x00000000cf74d018
ACPI: DSDT (v001 DELL E2 0x00001001 INTL 0x20080729) @ 0x0000000000000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to xen
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at d4000000 (gap: d0000000:28000000)
Built 1 zonelists. Total pages: 1951035
Kernel command line: ro root=/dev/rhel5/root rhgb quiet
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Xen reported: 1729.062 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Software IO TLB enabled:
Aperture: 64 megabytes
Kernel range: 0xffff88000a4b8000 - 0xffff88000e4b8000
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Memory: 7565288k/7804140k available (2490k kernel code, 230036k reserved, 1388k data, 184k init)
Calibrating delay using timer specific routine.. 4324.38 BogoMIPS (lpj=8648766)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
(SMP-)alternatives turned off
ACPI: Core revision 20060707
Initializing CPU#1
Initializing CPU#2
Initializing CPU#3
Initializing CPU#4
Initializing CPU#5
Initializing CPU#6
Brought up 8 CPUs
sizeof(vma)=168 bytes
sizeof(page)=56 bytes
sizeof(inode)=560 bytes
sizeof(dentry)=216 bytes
Initializing CPU#7
sizeof(ext3inode)=760 bytes
sizeof(buffer_head)=96 bytes
sizeof(skbuff)=248 bytes
migration_cost=3
checking if image is initramfs... it is
Grant table initialized
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Not using MMCONFIG.
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Bus #05 (-#08) is hidden behind bridge #04 (-#05) (try 'pci=assign-busses')
Please report the result to linux-kernel to fix this permanently
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: Embedded Controller [ECDV] (gpe 16) interrupt mode.
ACPI Error (psargs-0355): [\_PR_.CPU0._PPC] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.PPCE] (Node ffff88000e55e490), AE_NOT_FOUND
ACPI Error (psparse-0537): Method parse/execution failed [\EV4_] (Node ffff8800000041f0), AE_NOT_FOUND
ACPI Error (psparse-0537): Method parse/execution failed [\SMIE] (Node ffff88000e55b830), AE_NOT_FOUND
ACPI Error (psparse-0537): Method parse/execution failed [\NEVT] (Node ffff88000e55b890), AE_NOT_FOUND
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.ECDV._Q66] (Node ffff88000e55dcf0), AE_NOT_FOUND
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG3._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Root Bridge [CPBG] (0000:3f)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
GSI 23 sharing vector 0x98 and IRQ 23
pnp: PnP ACPI: found 13 devices
xen_mem: Initialising balloon driver.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
PCI: Bridge: 0000:00:03.0
IO window: 7000-7fff
MEM window: d0000000-e30fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.0
IO window: 6000-6fff
MEM window: e8200000-e95fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.1
IO window: 5000-5fff
MEM window: e6e00000-e81fffff
PREFETCH window: disabled.
PCI: mem resource #10:2000000 at e6000000 for 0000:04:00.0 was not allocated.
PCI: Bus 5, cardbus bridge: 0000:04:00.0
IO window: 00002000-000020ff
IO window: 00002400-000024ff
PREFETCH window: ea000000-ebffffff
PCI: Bridge: 0000:00:1c.2
IO window: 2000-3fff
MEM window: e3100000-e59fffff
PREFETCH window 0x00000000ea000000-0x00000000ebffffff
PCI: Bridge: 0000:00:1c.3
IO window: 4000-4fff
MEM window: e5a00000-e6dfffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
GSI 16 sharing vector 0xA0 and IRQ 16
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:03.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
GSI 17 sharing vector 0xA8 and IRQ 17
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.1 to 64
GSI 18 sharing vector 0xB0 and IRQ 18
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1c.2 to 64
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:04:00.0 to 64
GSI 19 sharing vector 0xB8 and IRQ 19
ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1c.3 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
Simple Boot Flag at 0xf1 set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1287651558.040:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
alg: No test for crc32c (crc32c-generic)
ksign: Installing public key data
Loading keyring
- Added public key 4BD2703D74512BB
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:03.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:03.0:pcie00]
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Allocate Port Service[0000:00:1c.2:pcie02]
ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1c.3 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.3:pcie00]
Allocate Port Service[0000:00:1c.3:pcie02]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707]
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [20060707]
ACPI: CPU0 (power states: C1[C1] C2[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ ApIst] [20060707]
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ ApCst] [20060707]
ACPI: CPU1 (power states: C1[C1] C2[C3])
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: CPU2 (power states: C1[C1] C2[C3])
ACPI: Processor [CPU2] (supports 8 throttling states)
ACPI: CPU3 (power states: C1[C1] C2[C3])
ACPI: Processor [CPU3] (supports 8 throttling states)
ACPI: CPU4 (power states: C1[C1] C2[C3])
ACPI: Processor [CPU4] (supports 8 throttling states)
ACPI: CPU5 (power states: C1[C1] C2[C3])
ACPI: Processor [CPU5] (supports 8 throttling states)
ACPI: CPU6 (power states: C1[C1] C2[C3])
ACPI: Processor [CPU6] (supports 8 throttling states)
ACPI: CPU7 (power states: C1[C1] C2[C3])
ACPI: Processor [CPU7] (supports 8 throttling states)
Real Time Clock Driver v1.12ac
hpet_acpi_add: no address or irqs in _CRS
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
brd: module loaded
Xen virtual console successfully installed as ttyS0
Event-channel device installed.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
Probing IDE interface ide1...
ide-floppy driver 0.99.newide
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 18
Yenta: CardBus bridge found at 0000:04:00.0 [1028:040c]
PCI: Bus 5, cardbus bridge: 0000:04:00.0
IO window: 00002000-000020ff
IO window: 00002400-000024ff
PREFETCH window: ea000000-ebffffff
MEM window: e3400000-e37fffff
Yenta: ISA IRQ mask 0x0000, PCI irq 18
Socket status: 30000006
Yenta: Upper limit for fixing this bridge's parent bridge: #05
pcmcia: parent PCI bridge I/O window: 0x2000 - 0x3fff
pcmcia: parent PCI bridge Memory window: 0xe3100000 - 0xe59fffff
pcmcia: parent PCI bridge Memory window: 0xea000000 - 0xebffffff
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Warning: Keylock active.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Initalizing network drop monitor service
Write protecting the kernel read-only data: 478k
input: AT Translated Set 2 keyboard as /class/input/input0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1a.0 to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
PCI: cache line size of 32 is not supported by device 0000:00:1a.0
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xe9670000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.0 to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
PCI: cache line size of 32 is not supported by device 0000:00:1d.0
ehci_hcd 0000:00:1d.0: irq 17, io mem 0xe9650000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v3.0
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 18 (level, low) -> IRQ 18
usb 1-1: new high speed USB device using ehci_hcd and address 2
input: PS/2 Generic Mouse as /class/input/input1
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high speed USB device using ehci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 1-1.4: new high speed USB device using ehci_hcd and address 3
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3b impl RAID mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048 at 0xe9640000 port 0xe9640100 irq 250
ata2: SATA max UDMA/133 abar m2048 at 0xe9640000 port 0xe9640180 irq 250
ata3: DUMMY
ata4: SATA max UDMA/133 abar m2048 at 0xe9640000 port 0xe9640280 irq 250
ata5: SATA max UDMA/133 abar m2048 at 0xe9640000 port 0xe9640300 irq 250
ata6: SATA max UDMA/133 abar m2048 at 0xe9640000 port 0xe9640380 irq 250
usb 1-1.4: configuration #1 chosen from 1 choice
usb 2-1.7: new full speed USB device using ehci_hcd and address 3
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
ata1.00: ATA-8: ST9500420AS, D005SDM1, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
ata1.00: configured for UDMA/133
usb 2-1.7: configuration #1 chosen from 1 choice
usb 2-1.8: new full speed USB device using ehci_hcd and address 4
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU10N, A102, max UDMA/133, ATAPI AN
ata2.00: configured for UDMA/133
usb 2-1.8: configuration #0 chosen from 1 choice
usb 2-1.8: config 0 descriptor??
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
Vendor: ATA Model: ST9500420AS Rev: D005
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
sd 0:0:0:0: Attached scsi disk sda
Vendor: HL-DT-ST Model: DVD+-RW GU10N Rev: A102
Type: CD-ROM ANSI SCSI revision: 05
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel at redhat.com
device-mapper: dm-raid45: initialized v0.2594l
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1287651583.945:2): selinux=0 auid=4294967295 ses=4294967295
pnp: Device 00:08 activated.
parport: PnPBIOS parport detected.
pnp: Device 00:08 disabled.
Bluetooth: Core ver 2.10
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_3M (05ca:1814)
input: Laptop_Integrated_Webcam_3M as /class/input/input2
usbcore: registered new driver uvcvideo
USB Video Class driver (v0.1.0)
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new driver hci_usb
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: PC Speaker as /class/input/input3
e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
e1000e: Copyright (c) 1999-2008 Intel Corporation.
GSI 20 sharing vector 0x31 and IRQ 20
ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:19.0 to 64
sdhci: Secure Digital Host Controller Interface driver, 0.12
sdhci: Copyright(c) Pierre Ossman
eth0: (PCI Express:2.5GB/s:Width x1) 00:26:b9:d5:39:97
eth0: Intel(R) PRO/1000 Network Connection
eth0: MAC: 9, PHY: 10, PBA No: 5051ff-0ff
sdhci: SDHCI controller found at 0000:04:00.1 [1180:e822] (rev 3)
ACPI: PCI Interrupt 0000:04:00.1[B] -> GSI 19 (level, low) -> IRQ 19
sdhci:slot0: Unknown controller version (2). You may experience problems.
PCI: Setting latency timer of device 0000:04:00.1 to 64
mmc0: SDHCI at 0xe5930000 irq 19 DMA
ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 18
Floppy drive(s): fd0 is 1.44M
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Attached scsi generic sg1 type 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
GSI 21 sharing vector 0x41 and IRQ 21
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1b.0 to 64
input: HDA Digital PCBeep as /class/input/input4
floppy0: no floppy controllers found
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
lp: driver loaded but no devices found
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Battery Slot [BAT1] (battery absent)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Power Button (CM) [PBTN]
ACPI: Sleep Button (CM) [SBTN]
input: Video Bus as /class/input/input5
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
input: Video Bus as /class/input/input6
ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
input: Video Bus as /class/input/input7
ACPI: Video Device [VID2] (multi-head: yes rom: no post: no)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on dm-0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 16777208k swap on /dev/rhel5/swap. Priority:-1 extents:1 across:16777208k
IA-32 Microcode Update Driver: v1.14-xen <tigran at veritas.com>
Loading iSCSI transport class v2.0-871.
802.1Q VLAN Support v1.8 Ben Greear <greearb at candelatech.com>
All bugs added by David S. Miller <davem at redhat.com>
cxgb3i: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
iscsi: registered transport (cxgb3i)
Broadcom NetXtreme II CNIC Driver cnic v2.0.0 (March 21, 2009)
Broadcom NetXtreme II iSCSI Driver bnx2i v2.0.1e (June 22, 2009)
iscsi: registered transport (bnx2i)
iscsi: registered transport (tcp)
iscsi: registered transport (iser)
ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000e: eth0 NIC Link is Up 10 Mbps Full Duplex, Flow Control: RX
eth0: 10/100 speed: disabling TSO
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
eth0: no IPv6 routers present
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
hsfengine: module license 'see LICENSE file distributed with driver' taints kernel.
usbcore: registered new driver hsfusbcd2
usbcore: deregistering driver hsfusbcd2
usbcore: registered new driver hsfusbcd2
scim-bridge[5337]: segfault at 0000000000000010 rip 0000003918e6d110 rsp 00007fffab90a4b8 error 4
scim-bridge[5353]: segfault at 0000000000000010 rip 0000003918e6d110 rsp 00007fff668fbd18 error 4
scim-bridge[5506]: segfault at 0000000000000010 rip 0000003918e6d110 rsp 00007fff3c7a8958 error 4
scim-bridge[5509]: segfault at 0000000000000010 rip 0000003918e6d110 rsp 00007ffff5ec2728 error 4
scim-bridge[5511]: segfault at 0000000000000010 rip 0000003918e6d110 rsp 00007fff85457ee8 error 4
scim-bridge[5519]: segfault at 0000000000000010 rip 0000003918e6d110 rsp 00007fff0eed74e8 error 4
osu_alltoall[8803]: segfault at 0000000000000000 rip 00002b1bcac1ced5 rsp 00007fff64a3b650 error 4
osu_alltoall[8923]: segfault at 0000000000000000 rip 00002b6adcd0fed5 rsp 00007fff18a37000 error 4
usb 2-1.2: new low speed USB device using ehci_hcd and address 5
usb 2-1.2: configuration #1 chosen from 1 choice
input: Logitech USB Optical Mouse as /class/input/input8
input: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.2
scim-bridge[5548]: segfault at 0000000000000010 rip 0000003918e6d110 rsp 00007fff6f720cf8 error 4
-------------- next part --------------
A non-text attachment was scrubbed...
Name: configuration_script.log
Type: text/x-log
Size: 1899 bytes
Desc: not available
Url : http://mail.cse.ohio-state.edu/pipermail/mvapich-discuss/attachments/20101021/de6ede41/configuration_script-0001.bin
-------------- next part --------------
A non-text attachment was scrubbed...
Name: config.log
Type: text/x-log
Size: 16482 bytes
Desc: not available
Url : http://mail.cse.ohio-state.edu/pipermail/mvapich-discuss/attachments/20101021/de6ede41/config-0001.bin
-------------- next part --------------
A non-text attachment was scrubbed...
Name: make.log
Type: text/x-log
Size: 3355 bytes
Desc: not available
Url : http://mail.cse.ohio-state.edu/pipermail/mvapich-discuss/attachments/20101021/de6ede41/make-0001.bin
-------------- next part --------------
A non-text attachment was scrubbed...
Name: make_install.log
Type: text/x-log
Size: 558 bytes
Desc: not available
Url : http://mail.cse.ohio-state.edu/pipermail/mvapich-discuss/attachments/20101021/de6ede41/make_install-0001.bin
More information about the mvapich-discuss
mailing list