[Intl_DxMedPhys] [EXTERNAL] Re: Siemens X.Cite

[Goetz,Danielle]

Good afternoon.

Is there a trick that anyone has found when testing beam width on the Siemens X.Cite CT scanners?

These systems are not as user friendly as others and you are limited to factor collimation settings.  The collimation 64x.6 that I tested should have given me approx. 38.4mm and I measured 61mm.  I know I need to pick a protocol without z-sharp, but has anyone else come across this and what did you find/ use for testing?


Thanks in advance.

DG

Danielle Goetz, MS
Medical Physicist
Sanford Health Bismarck
Direct: (701) 323-8722
Mobile: (701) 527-2835
Route: #20739
Danielle.M.Goetz at sanfordhealth.org<mailto:Danielle.M.Goetz at sanfordhealth.org>
[Icon  Description automatically generated with medium confidence]


-----------------------------------------------------------------------
Confidentiality Notice: This e-mail message, including any attachments,
is for the sole use of the intended recipient(s) and may contain
privileged and confidential information. Any unauthorized review, use,
disclosure or distribution is prohibited. If you are not
the intended recipient, please contact the sender by reply e-mail and destroy
all copies of the original message.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.osu.edu/mailman/private/intl_dxmedphys_wd_osu_list/attachments/20250211/80d34bbe/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 5516 bytes
Desc: image001.png
URL: <https://lists.osu.edu/mailman/private/intl_dxmedphys_wd_osu_list/attachments/20250211/80d34bbe/attachment.png>