Exp 14 data-entry postlab

[Robert Zellmer]

Don't forget to do your post-lab for exp 14.  It is due when your report 
is due.
You use the data for your *UNKNOWN*.   Do NOT enter the data for your known
compound.

Also, when you get to the end you are asked to calculate the delta(Hv) 
using
your slope and the "correct" slope.  What does this mean?
You've calculated a slope and the program calculates a slope based on the
numbers you input.  You calculate delta(Hv) for both slopes, your slope and
the "correct" slope calculated by the program.  They should be very 
similar,
assuming you've done the correct calculations.

My advice is to get all your calculations done (use Excel).  Check your 
numbers
to make sure everything is okay (you need to do sample calc. anyway).  Then
go on line and do the post-lab.  If you've calculated everything 
correctly it
should be a fairly simple straightforward matter of typing your numbers 
in from
your Excel file or report sheet.  If you find you've made a mistake 
correct your
calculations before moving on with the program.

Dr. Zellmer
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osu.edu/pipermail/cbc-chem1250/attachments/20160309/392d49a0/attachment.html>