white notebook pages, report sheets

[robert zellmer]

Do NOT tear out the white notebook pages and turn them in with the
report.  These should ALWAYS remain in the notebook.  The carbons
are torn out before leaving lab and given to the TA.

The report sheets from the manual are turned in with the report (as part
of the report).  You have two choices for this:

      1)  Fill in the report sheets, rip them out and turn them in as part
             of the report.  If you used Excel to do some of the 
calculations
             and graphs turn those sheets in as well, even if they aren't
             formatted to look like the report sheet. We want to see the
             numbers you used in Excel used for the calculations and graphs.

      2)  Use Excel to make the data tables and report sheets. Make the
             Excel worksheets look pretty much like the report sheet.  
Fill in
             the Excel worksheet (programming the equations in is very 
useful),
             print out the Excel worksheets (right from Excel - same for the
             graphs) and turn it in with the report in place of the 
report sheet.
             You do not have to copy all the numbers over to the report 
sheet.
             However, the report sheet still needs to be torn out of the 
manual
             and turned in with the report, even if blank.

In either case, make sure you have units somewhere (in the column headings
is most convenient) and make sure you have the correct number of s.f. As
mentioned before, this is a little tricky to do in Excel but can be done by
setting the correct number of decimal places.

Dr. Zellmer
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.osu.edu/mailman/private/cbc-chem1220/attachments/20150118/49e5671f/attachment.html>