[Mvapich-discuss] MVAPICH2 GDR from source code?
John Moore
john at flexcompute.com
Tue Jan 11 14:48:30 EST 2022
Hello,
We have been struggling to get MVAPICH2 to work with cuda-aware support and
RDMA. We have compiled MVAPICH2 from source, with the --enable-cuda option,
but when we run the osu_bibw bandwidth test using Device to Device
communication, we get a segmentation fault.
Below is the output from osu_bibw using MVAPICH2:
MVAPICH2-2.3.6 Parameters
---------------------------------------------------------------------
PROCESSOR ARCH NAME : MV2_ARCH_AMD_EPYC_7401_48
PROCESSOR FAMILY NAME : MV2_CPU_FAMILY_AMD
PROCESSOR MODEL NUMBER : 1
HCA NAME : MV2_HCA_MLX_CX_HDR
HETEROGENEOUS HCA : NO
MV2_EAGERSIZE_1SC : 0
MV2_SMP_EAGERSIZE : 16385
MV2_SMP_QUEUE_LENGTH : 65536
MV2_SMP_NUM_SEND_BUFFER : 16
MV2_SMP_BATCH_SIZE : 8
Tuning Table: : MV2_ARCH_AMD_EPYC_7401_48
MV2_HCA_MLX_CX_HDR
---------------------------------------------------------------------
# OSU MPI-CUDA Bi-Directional Bandwidth Test v5.7.1
# Send Buffer on DEVICE (D) and Receive Buffer on DEVICE (D)
# Size Bandwidth (MB/s)
1 0.07
2 0.15
4 0.29
8 0.57
16 1.12
32 2.30
64 4.75
128 9.41
256 18.44
512 37.22
1024 74.82
2048 144.70
4096 289.96
8192 577.33
[cell3:mpi_rank_0][error_sighandler] Caught error: Segmentation fault
(signal 11)
[cell3:mpi_rank_1][error_sighandler] Caught error: Segmentation fault
(signal 11)
===================================================================================
= BAD TERMINATION OF ONE OF YOUR APPLICATION PROCESSES
= PID 471850 RUNNING AT cell3
= EXIT CODE: 139
= CLEANING UP REMAINING PROCESSES
= YOU CAN IGNORE THE BELOW CLEANUP MESSAGES
===================================================================================
And this is with OpenMPI:
# OSU MPI-CUDA Bi-Directional Bandwidth Test v5.8
# Send Buffer on DEVICE (D) and Receive Buffer on DEVICE (D)
# Size Bandwidth (MB/s)
1 0.43
2 0.83
4 1.68
8 3.37
16 6.72
32 13.42
64 27.02
128 53.78
256 107.88
512 219.45
1024 437.81
2048 875.12
4096 1747.23
8192 3528.97
16384 7015.15
32768 13973.59
65536 27702.68
131072 51877.67
262144 94556.99
524288 157755.18
1048576 236772.67
2097152 333635.13
4194304 408865.93
Can GDR support be obtained by compiling from source like we are trying to
do or do we have to use an RPM? We export MV2_USE_CUDA=1. Any
recommendations would be greatly appreciated.
Thanks,
John
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osu.edu/pipermail/mvapich-discuss/attachments/20220111/aa671d3a/attachment-0021.html>
More information about the Mvapich-discuss
mailing list