[mvapich-discuss] Problem building mvapich2-1.7

Tue Oct 11 15:11:32 EDT 2011

Could that be some kind of DESTDIR related bug ?

----- Original Message -----
> Jonathan,
> 
> I don't think that's right - the first time the libtool error appears
> in that typescript is on line 8282; the build for mpitests doesn't
> begin till line 8519, then the libtool error appears for a second
> time, on like 8660 of the typescript.
> 
> -----Original Message-----
> From: Jonathan Perkins [mailto:perkinjo at cse.ohio-state.edu]
> Sent: Tuesday, October 11, 2011 1:59 PM
> To: Mike Heinz
> Cc: mvapich-discuss at cse.ohio-state.edu; Todd Rimmer
> Subject: Re: [mvapich-discuss] Problem building mvapich2-1.7
> 
> Thanks for the typescript. I've taken a quick look through the logs
> and I see that its not actually the mvapich2 rpm that is failing but
> the mpitests rpm. The other interesting thing to note is that the rpm
> builds fine but its only at installation time.
> 
> 
> If the QLogic script is simply using rpm -Uvh or yum localinstall -y
> at this point then the problem could be related to the post install
> step of the mpitests rpm. Other than that guess I'm not sure what is
> going on. I'm going to see if I can reproduce this on one of our
> systems and take a quick look if I can.
> 
> ==========================================================
> 
> Installing test programs 3.2 for MVAPICH2 MPI 1.7...
> 
> Preparing packages for installation...
> 
> mpitests_mvapich2_gcc-3.2-923
> 
> Build Errors:
> 
> make[2]: *** [INSTALL_LIBSO] Error 1
> 
> make[4]: [clean-postamble] Error 1 (ignored)
> 
> 
> 
> FAILED Build, errors detected
> 
> On Tue, Oct 11, 2011 at 1:29 PM, Mike Heinz <michael.heinz at qlogic.com>
> wrote:
> > Okay - I can confirm that I get this problem when building straight
> > from the OFED source RPM, but -->not<-- when building from the
> > MVAPICH2 tarball I just downloaded from OSU.
> >
> > The only "special" thing here is I used the script we provide our
> > users to specify the options for the rpm build.
> >
> > Machine settings are:
> >
> > [root at ifs002 MPI]# uname -a
> > Linux ifs002.dev.silverstorm.com 2.6.32-131.0.15.el6.x86_64 #1 SMP
> > Tue
> > May 10 15:42:40 EDT 2011 x86_64 x86_64 x86_64 GNU/Linux
> > [root at ifs002 MPI]# cat /etc/redhat-release Red Hat Enterprise Linux
> > Server release 6.1 (Santiago)
> > [root at ifs002 MPI]# gcc --version
> > gcc (GCC) 4.4.5 20110214 (Red Hat 4.4.5-6) Copyright (C) 2010 Free
> > Software Foundation, Inc.
> > This is free software; see the source for copying conditions. There
> > is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
> > PARTICULAR PURPOSE.
> >
> > Configure options were:
> >
> > ./configure --prefix=/usr/mpi/gcc/mvapich2-1.7 --with-rdma=gen2
> > --with-ib-include=/usr/include --with-ib-libpath=/usr/lib64
> > --enable-shared CC=gcc CXX=g++ F77=gfortran FC=gfortran
> >
> > I've attached a typescript capture of the build process.
> >
> > -----Original Message-----
> > From: mvapich-discuss-bounces at cse.ohio-state.edu
> > [mailto:mvapich-discuss-bounces at cse.ohio-state.edu] On Behalf Of
> > Mike
> > Heinz
> > Sent: Tuesday, October 11, 2011 12:50 PM
> > To: Jonathan Perkins; mvapich-discuss at cse.ohio-state.edu
> > Cc: Todd Rimmer
> > Subject: RE: [mvapich-discuss] Problem building mvapich2-1.7
> >
> > Jonathan,
> >
> > The error came up in the middle of a build of the QLogic IFS bundle
> > (which is OFED plus additional stuff) so I'm working my way through
> > doing a standalone build from the tarball of mvapich2-1.7 to see if
> > I get the same result. I'm building on RHEL6.1.
> >
> > If the standalone build completes with the same error, I'll pass you
> > the logs but since you obviously haven't encountered this issue, I
> > won't bother you if it turns out that the problem is in our build
> > process.
> >
> > -----Original Message-----
> > From: Jonathan Perkins [mailto:perkinjo at cse.ohio-state.edu]
> > Sent: Tuesday, October 11, 2011 12:46 PM
> > To: Mike Heinz
> > Cc: mvapich-discuss at cse.ohio-state.edu
> > Subject: Re: [mvapich-discuss] Problem building mvapich2-1.7
> >
> > Hello Mike,
> > Can you send me the full logs related to this build. I would like to
> > see the rpmbuild command line used during this build. Can you also
> > tell me which linux distribution that you're using to build this as
> > well as any other oddities that you may believe could be applicable
> > in reproducing this failure? Thanks.
> >
> > On Tue, Oct 11, 2011 at 12:16 PM, Mike Heinz
> > <michael.heinz at qlogic.com> wrote:
> >> When building the version of mvapich2 shipped with OFED 1.5.4-rc1,
> >> I'm getting the following error message:
> >>
> >> /bin/sh ../libtool --finish
> >> /usr/mpi/gcc/mvapich2-1.7/lib/trace_rlog
> >> libtool: finish: invalid argument
> >> `/usr/mpi/gcc/mvapich2-1.7/lib/trace_rlog'
> >> make[2]: *** [INSTALL_LIBSO] Error 1
> >>
> >> Any ideas what might be causing this?
> >>
> >>
> >> This message and any attached documents contain information from
> >> QLogic Corporation or its wholly-owned subsidiaries that may be
> >> confidential. If you are not the intended recipient, you may not
> >> read, copy, distribute, or use this information. If you have
> >> received this transmission in error, please notify the sender
> >> immediately by reply e-mail and then delete this message.
> >>
> >>
> >> _______________________________________________
> >> mvapich-discuss mailing list
> >> mvapich-discuss at cse.ohio-state.edu
> >> http://mail.cse.ohio-state.edu/mailman/listinfo/mvapich-discuss
> >>
> >>
> >
> >
> >
> > --
> > Jonathan Perkins
> > http://www.cse.ohio-state.edu/~perkinjo
> >
> >
> > This message and any attached documents contain information from
> > QLogic Corporation or its wholly-owned subsidiaries that may be
> > confidential. If you are not the intended recipient, you may not
> > read, copy, distribute, or use this information. If you have
> > received this transmission in error, please notify the sender
> > immediately by reply e-mail and then delete this message.
> >
> >
> > _______________________________________________
> > mvapich-discuss mailing list
> > mvapich-discuss at cse.ohio-state.edu
> > http://mail.cse.ohio-state.edu/mailman/listinfo/mvapich-discuss
> >
> >
> > This message and any attached documents contain information from
> > QLogic Corporation or its wholly-owned subsidiaries that may be
> > confidential. If you are not the intended recipient, you may not
> > read, copy, distribute, or use this information. If you have
> > received this transmission in error, please notify the sender
> > immediately by reply e-mail and then delete this message.
> >
> 
> 
> 
> --
> Jonathan Perkins
> http://www.cse.ohio-state.edu/~perkinjo
> 
> 
> This message and any attached documents contain information from
> QLogic Corporation or its wholly-owned subsidiaries that may be
> confidential. If you are not the intended recipient, you may not read,
> copy, distribute, or use this information. If you have received this
> transmission in error, please notify the sender immediately by reply
> e-mail and then delete this message.
> 
> 
> _______________________________________________
> mvapich-discuss mailing list
> mvapich-discuss at cse.ohio-state.edu
> http://mail.cse.ohio-state.edu/mailman/listinfo/mvapich-discuss