[mvapich-discuss] MVAPICH

[Jonathan Perkins]

Hello.  It looks like there is a segmentation fault according to your
message.  Have you checked the backtrace to see where this is
originating from?  This information along with the version of mvapich
or mvapich2 may help narrow down the cause of this issue.

You may also want to verify that simple applications such as the OSU
Micro Benchmarks are able to run on your system to help rule out
installation issues.

Please see http://mvapich.cse.ohio-state.edu/benchmarks/ for more
information on downloading and using the benchmarks.

On Wed, Apr 13, 2011 at 10:08 AM, Mouhamad Al-Sayed-Ali
<Mouhamad.Al-Sayed-Ali at u-bourgogne.fr> wrote:
> Dear all,
>
>
>  I have trying to run a binary ARPCLIM-mvapich-gcc450-debug3 (compiled by
> MVAPICH) using
>
>  mpirun -np 2 -machinefile file ARPCLIM-mvapich-gcc450-debug3
>
>  But, I get the following error.
>
> --------
> OASIS3 environment variable           :
> OASIS3DEBUGLEVEL environment variable :
> LOASIS3,IOASIS3LVL,IOASIS3DEBUGLVL =    F   0   0
> MPL_INIT : LMPLUSERCOMM not used
> Communicator : ********
> OASIS3 environment variable           :
> OASIS3DEBUGLEVEL environment variable :
> LOASIS3,IOASIS3LVL,IOASIS3DEBUGLVL =    F   0   0
> MPL_INIT : LMPLUSERCOMM not used
> Communicator : ********
> MPL_INIT : LMPLUSERCOMM not used
> Communicator : ********
> MPL_INIT : LMPLUSERCOMM not used
> Communicator : ********
> signal_drhook(SIGABRT=6): New handler installed at 0x171d73f; old preserved
> at 0x0
> signal_drhook(SIGBUS=7): New handler installed at 0x171d73f; old preserved
> at 0x0
> signal_drhook(SIGSEGV=11): New handler installed at 0x171d73f; old preserved
> at 0x0
> signal_drhook(SIGILL=4): New handler installed at 0x171d73f; old preserved
> at 0x0
> signal_drhook(SIGSTKFLT=16): New handler installed at 0x171d73f; old
> preserved at 0x0
> signal_drhook(SIGFPE=8): New handler installed at 0x171d73f; old preserved
> at 0x0
> signal_drhook(SIGTRAP=5): New handler installed at 0x171d73f; old preserved
> at 0x0
> signal_drhook(SIGINT=2): New handler installed at 0x171d73f; old preserved
> at 0x0
> signal_drhook(SIGQUIT=3): New handler installed at 0x171d73f; old preserved
> at 0x0
> signal_drhook(SIGTERM=15): New handler installed at 0x171d73f; old preserved
> at 0x0
> signal_drhook(SIGXCPU=24): New handler installed at 0x171d73f; old preserved
> at 0x0
> signal_drhook(SIGSYS=31): New handler installed at 0x171d73f; old preserved
> at 0x0
> MPL_BUFFER_METHOD:  2 128000000
> MPL_BUFFER_METHOD:  2 128000000
> [myproc#2,tid#1,pid#-1,signal#11(SIGSEGV)]: Received signal :: 0MB (heap),
> 0MB (rss), 0MB (stack), 0 (paging), nsigs 1, time     0.00
> Activating SIGALRM=14 and calling alarm(10), time =    0.00
> JSETSIG: sl->active = 0
> signal_drhook(SIGALRM=14): New handler installed at 0x171d73f; old preserved
> at 0x0
> tid#1 starting drhook traceback, time =    0.00
> tid#1 starting sigdump traceback, time =    0.00
> [gdb__sigdump] : Received signal#11(SIGSEGV), pid=-1
> [LinuxTraceBack]: Backtrace(s) for program 'ARPCLIM-mvapich-gcc450-debug3' :
> [myproc#1,tid#1,pid#-1,signal#11(SIGSEGV)]: Received signal :: 0MB (heap),
> 0MB (rss), 0MB (stack), 0 (paging), nsigs 1, time     0.00
> Activating SIGALRM=14 and calling alarm(10), time =    0.00
> JSETSIG: sl->active = 0
> signal_drhook(SIGALRM=14): New handler installed at 0x171d73f; old preserved
> at 0x0
> tid#1 starting drhook traceback, time =    0.00
> tid#1 starting sigdump traceback, time =    0.00
> [gdb__sigdump] : Received signal#11(SIGSEGV), pid=-1
> [LinuxTraceBack]: Backtrace(s) for program 'ARPCLIM-mvapich-gcc450-debug3' :
> [myproc#2,tid#1,pid#-1,signal#14(SIGALRM)]: Received signal :: 0MB (heap),
> 0MB (rss), 0MB (stack), 0 (paging), nsigs 2, time    10.00
>
> =====================================================================================
> =   BAD TERMINATION OF ONE OF YOUR APPLICATION PROCESSES
> =   EXIT CODE: 9
> =   CLEANING UP REMAINING PROCESSES
> =   YOU CAN IGNORE THE BELOW CLEANUP MESSAGES
> =====================================================================================
> APPLICATION TERMINATED WITH THE EXIT STRING: Killed (signal 9)
> -----------------------------
>
>
> Can anyone help me, please ?
>
>
> Many thanks
>
> Mouhamad Al sayed Ali
>
>
> post-doctoral in applied mathematics
> _______________________________________________
> mvapich-discuss mailing list
> mvapich-discuss at cse.ohio-state.edu
> http://mail.cse.ohio-state.edu/mailman/listinfo/mvapich-discuss
>
>



-- 
Jonathan Perkins
http://www.cse.ohio-state.edu/~perkinjo