[mvapich-discuss] compile charm++ and namd with mvapich
1.0.1and/or mvapich2
Mehdi Bozzo-Rey
mbozzore at platform.com
Fri Aug 15 08:48:12 EDT 2008
Hello Vlad,
If you don’t plan to use gfortran, then the gfortran things are not relevant.
Cheers,
Mehdi
Mehdi Bozzo-Rey <mailto:mbozzore at platform.com>
Open Source Solution Developer
Platform OCS5 <http://www.platform.com/Products/platform-open-cluster-stack5>
Platform computing
Phone: +1 905 948 4649
From: Vlad Cojocaru [mailto:Vlad.Cojocaru at eml-r.villa-bosch.de]
Sent: August-15-08 8:42 AM
To: Dhabaleswar Panda
Cc: Mehdi Bozzo-Rey; mvapich-discuss at cse.ohio-state.edu
Subject: Re: [mvapich-discuss] compile charm++ and namd with mvapich 1.0.1and/or mvapich2
Dear Dhabaleswar, Dear Mehdi,
Thanks a lot for your answers. I do have the user guide in front of my eyes but I still cannot explain all the references to /home/7/curtisbr/svn/mvapich2/mvapich2-1.2rc1 in the Makefile.in files in the source tree ....
It looks as if after replacing those with ${master_top_srcdir} mvapich2 builds correctly .. I still have to test it though ...
Is the gfortran stuff relevant since I do not use gfortran ?
Cheers
vlad
Dhabaleswar Panda wrote:
Vald,
Please take a look at the detailed user guides of MVAPICH and MVAPICH2
regarding how to build and install these packages. They are available from
the following URL:
http://mvapich.cse.ohio-state.edu/support/
MVAPICH2 1.2 series has full autoconf-based configuration framework. It
should significantly help you.
DK
On Fri, 15 Aug 2008, Vlad Cojocaru wrote:
Thanks Mehdi for all details,
I guess you mean gcc when you say gfortran ... namd is not written in
fortran but in charm++ which is an adaptation of c++...
Well, we have debian here so we used Debian packages to install the
inifiniband libs and headers ...(our sys administrator did that). Then I
tried to compile mvapich 1.0.1 and I found that I need the drastically
change the make.mvapich.gen2 file in order to get it to build (since the
defaults for $IBHOME are very strange ... we have everything in
/usr/include/infiniband and /usr/lib/infiniband ). After all I managed
to get it built but the namd hangs ....
So I decided to try mvapich2 (1.2rc1 version) and I found lots problems.
Some of them I could fix but some are very strange. For instance in the
entire source tree there are lots of references to strange directories
/home/daffy ... or /home/7 ... and so on .. Some of them I replaced with
${master_top_srcdir} since I figured out that one should replace them
but others I don't know ... Also, when I tried to build with shared
libs, the make is not able to build the mpiname application ... I could
not figure out why ...
So, lots of problems ....I'll try to figure them out ... However, the
problems with mvapich2 look more as bugs in the Makefiiles .. So, maybe
somebody would like to change those ...
Cheers
vlad
Mehdi Bozzo-Rey wrote:
Hi Vlad,
No, I did not use the intel compilers (not yet). I used gfortran. More
precisely:
OS:
RHEL 5.1 (Kernel 2.6.18-53.el5)
[mbozzore at tyan04 ~]$ mpicc --version
gcc (GCC) 4.1.2 20071124 (Red Hat 4.1.2-42)
[mbozzore at tyan04 ~]$ mpicxx --version
g++ (GCC) 4.1.2 20071124 (Red Hat 4.1.2-42)
[mbozzore at tyan04 ~]$ mpif77 --version
GNU Fortran (GCC) 4.1.2 20071124 (Red Hat 4.1.2-42)
[mbozzore at tyan04 ~]$ mpif90 --version
GNU Fortran (GCC) 4.1.2 20071124 (Red Hat 4.1.2-42)
Hardware: intel quads for the nodes, topspin switch and hcas for IB.
Yes, I used OFED (1.3).
I did not enable sharedlibs for that build.
I will double check but if I remember well, everything was fine
(compilation) on the mvapich2 side. What version did you use ?
Cheers,
Mehdi
Mehdi Bozzo-Rey
Open Source Solution Developer
Platform computing
Phone : +1 905 948 4649
E-mail : mbozzore at platform.com <mailto:mbozzore at platform.com> <mailto:mbozzore at platform.com>
*From:* Cojocaru,Vlad [mailto:vlad.cojocaru at eml-r.villa-bosch.de]
*Sent:* August-14-08 4:35 PM
*To:* Mehdi Bozzo-Rey; mvapich-discuss at cse.ohio-state.edu
*Subject:* RE: [mvapich-discuss] compile charm++ and namd with mvapich
1.0.1and/or mvapich2
Hi Mehdi,
Did you use intel 10.1 as well ? Did you build on openfabrics ? what
compiler flags did you pass to the mvapich build? Did you build with
--enable sharedlib or without? I would be grateful If you give me some
bits of the details how you built mvapich?.
Thanks for the reply. Yes, there is something about the compilation of
mvapich. As I said I successfully compiled NAMD on a cluster that had
already mvapich compiled with intel as the default mpi lib. However,
on the new cluster (quad cores AMD opterons with mellanox infiniband)
I got these problems. So, its definitely the mvapich build which
fails although I don't get any errors fro make.
Any idea why the mpiname application fails to compile when compiling
mvapich2 ?
Thanks again
Best wishes
vlad
-----Original Message-----
From: Mehdi Bozzo-Rey [mailto:mbozzore at platform.com]
Sent: Thu 8/14/2008 7:20 PM
To: Cojocaru,Vlad; mvapich-discuss at cse.ohio-state.edu
Subject: RE: [mvapich-discuss] compile charm++ and namd with mvapich
1.0.1and/or mvapich2
Hello Vlad,
I just recompiled NAMD and it looks ok for me (output of simple test
below). I guess the problem is on the compilation side.
Best regards,
Mehdi
Mehdi Bozzo-Rey
Open Source Solution Developer
Platform computing
Phone : +1 905 948 4649
E-mail : mbozzore at platform.com
[mbozzore at tyan04 Linux-amd64-MPI]$ mpirun_rsh -np 8 -hostfile
./hosts.8 ./namd2 src/alanin
Charm++> Running on MPI version: 1.2 multi-thread support: 1/1
Charm warning> Randomization of stack pointer is turned on in Kernel,
run 'echo 0 > /proc/sys/kernel/randomize_va_space' as root to disable
it. Thread migration may not work!
Info: NAMD 2.6 for Linux-amd64-MPI
Info:
Info: Please visit http://www.ks.uiuc.edu/Research/namd/
Info: and send feedback or bug reports to namd at ks.uiuc.edu
Info:
Info: Please cite Phillips et al., J. Comp. Chem. 26:1781-1802 (2005)
Info: in all publications reporting results obtained with NAMD.
Info:
Info: Based on Charm++/Converse 50914 for
mpi-linux-x86_64-gfortran-smp-mpicxx
Info: Built Thu Aug 14 13:12:02 EDT 2008 by mbozzore on
tyan04.lsf.platform.com
Info: 1 NAMD 2.6 Linux-amd64-MPI 8 compute-00-00.ocs5.org mbozzore
Info: Running on 8 processors.
Info: 8208 kB of memory in use.
Info: Memory usage based on mallinfo
Info: Changed directory to src
Info: Configuration file is alanin
TCL: Suspending until startup complete.
Info: SIMULATION PARAMETERS:
Info: TIMESTEP 0.5
Info: NUMBER OF STEPS 9
Info: STEPS PER CYCLE 3
Info: LOAD BALANCE STRATEGY Other
Info: LDB PERIOD 600 steps
Info: FIRST LDB TIMESTEP 15
Info: LDB BACKGROUND SCALING 1
Info: HOM BACKGROUND SCALING 1
Info: MAX SELF PARTITIONS 50
Info: MAX PAIR PARTITIONS 20
Info: SELF PARTITION ATOMS 125
Info: PAIR PARTITION ATOMS 200
Info: PAIR2 PARTITION ATOMS 400
Info: MIN ATOMS PER PATCH 100
Info: INITIAL TEMPERATURE 0
Info: CENTER OF MASS MOVING INITIALLY? NO
Info: DIELECTRIC 1
Info: EXCLUDE SCALED ONE-FOUR
Info: 1-4 SCALE FACTOR 0.4
Info: NO DCD TRAJECTORY OUTPUT
Info: NO EXTENDED SYSTEM TRAJECTORY OUTPUT
Info: NO VELOCITY DCD OUTPUT
Info: OUTPUT FILENAME output
Info: BINARY OUTPUT FILES WILL BE USED
Info: NO RESTART FILE
Info: SWITCHING ACTIVE
Info: SWITCHING ON 7
Info: SWITCHING OFF 8
Info: PAIRLIST DISTANCE 9
Info: PAIRLIST SHRINK RATE 0.01
Info: PAIRLIST GROW RATE 0.01
Info: PAIRLIST TRIGGER 0.3
Info: PAIRLISTS PER CYCLE 2
Info: PAIRLISTS ENABLED
Info: MARGIN 1
Info: HYDROGEN GROUP CUTOFF 2.5
Info: PATCH DIMENSION 12.5
Info: CROSSTERM ENERGY INCLUDED IN DIHEDRAL
Info: TIMING OUTPUT STEPS 15
Info: USING VERLET I (r-RESPA) MTS SCHEME.
Info: C1 SPLITTING OF LONG RANGE ELECTROSTATICS
Info: PLACING ATOMS IN PATCHES BY HYDROGEN GROUPS
Info: RANDOM NUMBER SEED 1218734148
Info: USE HYDROGEN BONDS? NO
Info: COORDINATE PDB alanin.pdb
Info: STRUCTURE FILE alanin.psf
Info: PARAMETER file: XPLOR format! (default)
Info: PARAMETERS alanin.params
Info: USING ARITHMETIC MEAN TO COMBINE L-J SIGMA PARAMETERS
Info: SUMMARY OF PARAMETERS:
Info: 61 BONDS
Info: 179 ANGLES
Info: 38 DIHEDRAL
Info: 42 IMPROPER
Info: 0 CROSSTERM
Info: 21 VDW
Info: 0 VDW_PAIRS
Info: ****************************
Info: STRUCTURE SUMMARY:
Info: 66 ATOMS
Info: 65 BONDS
Info: 96 ANGLES
Info: 31 DIHEDRALS
Info: 32 IMPROPERS
Info: 0 CROSSTERMS
Info: 0 EXCLUSIONS
Info: 195 DEGREES OF FREEDOM
Info: 55 HYDROGEN GROUPS
Info: TOTAL MASS = 783.886 amu
Info: TOTAL CHARGE = 8.19564e-08 e
Info: *****************************
Info: Entering startup phase 0 with 8208 kB of memory in use.
Info: Entering startup phase 1 with 8208 kB of memory in use.
Info: Entering startup phase 2 with 8208 kB of memory in use.
Info: Entering startup phase 3 with 8208 kB of memory in use.
Info: PATCH GRID IS 1 BY 1 BY 1
Info: REMOVING COM VELOCITY 0 0 0
Info: LARGEST PATCH (0) HAS 66 ATOMS
Info: CREATING 11 COMPUTE OBJECTS
Info: Entering startup phase 4 with 8208 kB of memory in use.
Info: Entering startup phase 5 with 8208 kB of memory in use.
Info: Entering startup phase 6 with 8208 kB of memory in use.
Measuring processor speeds... Done.
Info: Entering startup phase 7 with 8208 kB of memory in use.
Info: CREATING 11 COMPUTE OBJECTS
Info: NONBONDED TABLE R-SQUARED SPACING: 0.0625
Info: NONBONDED TABLE SIZE: 705 POINTS
Info: ABSOLUTE IMPRECISION IN FAST TABLE ENERGY: 3.38813e-21 AT 7.99609
Info: RELATIVE IMPRECISION IN FAST TABLE ENERGY: 1.27241e-16 AT 7.99609
Info: ABSOLUTE IMPRECISION IN FAST TABLE FORCE: 6.77626e-21 AT 7.99609
Info: RELATIVE IMPRECISION IN FAST TABLE FORCE: 1.1972e-16 AT 7.99609
Info: Entering startup phase 8 with 8208 kB of memory in use.
Info: Finished startup with 8208 kB of memory in use.
ETITLE: TS BOND ANGLE DIHED
IMPRP ELECT VDW BOUNDARY
MISC KINETIC TOTAL TEMP
TOTAL2 TOTAL3 TEMPAVG
ENERGY: 0 0.0050 0.4192 0.0368
0.4591 -210.1610 1.0506 0.0000
0.0000 0.0000 -208.1904 0.0000
-208.1877 -208.1877 0.0000
ENERGY: 1 0.0051 0.4196 0.0367
0.4585 -210.1611 1.0184 0.0000
0.0000 0.0325 -208.1905 0.1675
-208.1878 -208.1877 0.1675
ENERGY: 2 0.0058 0.4208 0.0365
0.4568 -210.1610 0.9219 0.0000
0.0000 0.1285 -208.1907 0.6632
-208.1881 -208.1877 0.6632
ENERGY: 3 0.0092 0.4232 0.0361
0.4542 -210.1599 0.7617 0.0000
0.0000 0.2845 -208.1910 1.4683
-208.1885 -208.1878 1.4683
ENERGY: 4 0.0176 0.4269 0.0356
0.4511 -210.1565 0.5386 0.0000
0.0000 0.4952 -208.1914 2.5561
-208.1890 -208.1878 2.5561
ENERGY: 5 0.0327 0.4327 0.0350
0.4480 -210.1489 0.2537 0.0000
0.0000 0.7552 -208.1917 3.8977
-208.1894 -208.1879 3.8977
ENERGY: 6 0.0552 0.4409 0.0343
0.4454 -210.1354 -0.0915 0.0000
0.0000 1.0592 -208.1920 5.4666
-208.1898 -208.1880 5.4666
ENERGY: 7 0.0839 0.4522 0.0334
0.4440 -210.1137 -0.4951 0.0000
0.0000 1.4031 -208.1922 7.2418
-208.1900 -208.1882 7.2418
ENERGY: 8 0.1162 0.4674 0.0325
0.4448 -210.0822 -0.9550 0.0000
0.0000 1.7839 -208.1923 9.2074
-208.1902 -208.1883 9.2074
ENERGY: 9 0.1492 0.4870 0.0315
0.4485 -210.0391 -1.4687 0.0000
0.0000 2.1990 -208.1925 11.3497
-208.1905 -208.1884 11.3497
WRITING EXTENDED SYSTEM TO OUTPUT FILE AT STEP 9
WRITING COORDINATES TO OUTPUT FILE AT STEP 9
WRITING VELOCITIES TO OUTPUT FILE AT STEP 9
==========================================
WallClock: 4.172574 CPUTime: 4.167367 Memory: 8208 kB
End of program
-----Original Message-----
From: mvapich-discuss-bounces at cse.ohio-state.edu
[mailto:mvapich-discuss-bounces at cse.ohio-state.edu] On Behalf Of Vlad
Cojocaru
Sent: August-14-08 11:32 AM
To: mvapich-discuss at cse.ohio-state.edu
Subject: [mvapich-discuss] compile charm++ and namd with mvapich
1.0.1and/or mvapich2
Dear mvapich users,
I tried to compile mvapich1.0.1, charm++ and namd on our new Linux-amd64
infiniband cluster using the intel 10.1.015 compilers. With
mvapich1.0.1, I managed to build mvapich1.0.1, tested the programs in
the /examples directory. Then, I bult charm++ and tested it with
"mpirun_rsh -n 2" .. All tests passed correctly. Then I built namd on
top of mvapich1.0.1 and charm,
Everything seemed ok only that the namd executable hangs without error
messages. In fact it appears as if it still runs but it doesn't produce
any output. If I repeat exactly the same procedure but with openmpi
instead of mvapich, everything works fine ....(however I am not so happy
about the scaling of openmpi on infiniband)
Does anyone have experience with installing namd using mvapich1.0.1 ? If
yes, any idea why this happens? I must say when I did the same on
another cluster which had mvapich1.0.1 already compiled with the intel
compilers, everything worked out correcltly. So, it must be something
with the compilation of mvapich1.0.1 on our new infiniband setup that
creates the problem.
The german in the error simply says that executable "mpiname was not
found"
Best wishes
vlad
----------------------------------error------------------------------------------------------------------------
I also tried mvapich2 but the compilation fails when installing the
mpiname application (see error below) which apparently fails to compile
(no executable is found in /env/mpiname dir). However no error messages
are printed by make and the build completes correctly. So I am not sure
why mpiname does not compile and still make install tries to install
it ...
/usr/bin/install -c mpiname/mpiname
/sw/mcm/app/vlad/mpi/C07/mvapich2/1.2/bin/mpiname
/usr/bin/install: Aufruf von stat für �mpiname/mpiname� nicht möglich:
Datei oder Verzeichnis nicht gefunden
make[1]: *** [install] Fehler 1
make[1]: Leaving directory
`/sw/mcm/app/vlad/mpi/C07/mvapich2/1.2-src/src/env'
make: *** [install] Fehler 2
--
----------------------------------------------------------------------------
Dr. Vlad Cojocaru
EML Research gGmbH
Schloss-Wolfsbrunnenweg 33
69118 Heidelberg
Tel: ++49-6221-533266
Fax: ++49-6221-533298
e-mail:Vlad.Cojocaru[at]eml-r.villa-bosch.de
http://projects.villa-bosch.de/mcm/people/cojocaru/
----------------------------------------------------------------------------
EML Research gGmbH
Amtgericht Mannheim / HRB 337446
Managing Partner: Dr. h.c. Klaus Tschira
Scientific and Managing Director: Prof. Dr.-Ing. Andreas Reuter
http://www.eml-r.org
----------------------------------------------------------------------------
_______________________________________________
mvapich-discuss mailing list
mvapich-discuss at cse.ohio-state.edu
http://mail.cse.ohio-state.edu/mailman/listinfo/mvapich-discuss
--
----------------------------------------------------------------------------
Dr. Vlad Cojocaru
EML Research gGmbH
Schloss-Wolfsbrunnenweg 33
69118 Heidelberg
Tel: ++49-6221-533266
Fax: ++49-6221-533298
e-mail:Vlad.Cojocaru[at]eml-r.villa-bosch.de
http://projects.villa-bosch.de/mcm/people/cojocaru/
----------------------------------------------------------------------------
EML Research gGmbH
Amtgericht Mannheim / HRB 337446
Managing Partner: Dr. h.c. Klaus Tschira
Scientific and Managing Director: Prof. Dr.-Ing. Andreas Reuter
http://www.eml-r.org
----------------------------------------------------------------------------
--
----------------------------------------------------------------------------
Dr. Vlad Cojocaru
EML Research gGmbH
Schloss-Wolfsbrunnenweg 33
69118 Heidelberg
Tel: ++49-6221-533266
Fax: ++49-6221-533298
e-mail:Vlad.Cojocaru[at]eml-r.villa-bosch.de
http://projects.villa-bosch.de/mcm/people/cojocaru/
----------------------------------------------------------------------------
EML Research gGmbH
Amtgericht Mannheim / HRB 337446
Managing Partner: Dr. h.c. Klaus Tschira
Scientific and Managing Director: Prof. Dr.-Ing. Andreas Reuter
http://www.eml-r.org
----------------------------------------------------------------------------
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mail.cse.ohio-state.edu/pipermail/mvapich-discuss/attachments/20080815/98967681/attachment-0001.html
More information about the mvapich-discuss
mailing list